Author Topic: Warp tension and suppressor Adaptor  (Read 349 times)

Scurry

  • Newbie
  • *
  • Posts: 9
Warp tension and suppressor Adaptor
« on: February 25, 2020, 07:36:31 AM »
Hi guys, I'm having trouble with my .30 warp again.
I've had some clipping with the original integrated suppressor and damaged the baffles.
Was hoping someone could help me source new baffles or the tensioning nut with screw on adapter for an after market suppressor? Any help will be much appreciated
Scott


  • Wagoner OK

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 2963
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: Warp tension and suppressor Adaptor
« Reply #1 on: February 25, 2020, 08:57:12 AM »
Your only supply would be Jim Gaska. He is VERY busy with his real job, and although he has announced he was closing shop, that may be only a temporary issue.

Call him, or send him an email, but don't expect to hear back instantly.

I have three used baffles for the old style; would that help you???

Answer me here, or call me between 7 and 7 mountain time.
 

575-626-4785
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

Scurry

  • Newbie
  • *
  • Posts: 9
Re: Warp tension and suppressor Adaptor
« Reply #2 on: February 25, 2020, 09:27:11 AM »
Thanks for your help. Yeah I haven't had much luck contacting Jim in some time now. Yes the baffles are all that is damaged, they are deformed and won't lay flat and started having clipping and accuracy problems. If you don't need them I would gladly purchase them from you
Thanks Scott
  • Wagoner OK

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 2963
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: Warp tension and suppressor Adaptor
« Reply #3 on: February 25, 2020, 10:00:52 AM »
No biggie Scott. They're for a .25 caliber, but if you're careful, you can drill them out to about 3/8 inch. You should do so using several drill sizes, and watch out for "snatching"!

PM me your mailing address.
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.