Author Topic: .30 Mrod  (Read 8151 times)

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2019
Re: .30 Mrod
« Reply #30 on: May 31, 2016, 07:45:11 PM »
My .22 Disco, .25 Can Gun and .30 Carbine are all free floated.  Great accuracy.  The .22 runs a DPV (Disco Power Valve form Discos r us) and stock 24" barrel, and the .25 and .30 run a Cothran PowerHouse valve each---.25 has the barrel that Baker sells, and the .30 has the TJ that Roy at Mountain Air sells.

Joe
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

Dairyboy

  • Hero Member
  • *****
  • Posts: 887
Re: .30 Mrod
« Reply #31 on: June 21, 2016, 05:53:17 PM »
I have since gone free floated don't know if it's the barrel harmonics of the .30 or what but it really prefers to be free floated unlike my .22 and I'm totally fine with that with accuracy I'm getting.

It's breaking in nicely I'm expecting the polymags will continue to shoot better once it's broken in thoroughly but there much better already than before.

Top left is resighting the .22.
Bottom left is getting the .30 resighted after taking foam out of barrel band. Moved to bottom right to finish as too many shots were on it. 4 shots in the center with 44.75 JSBs. Top right is 5 shots with polymags all at 25yds which I'm satisfied with.

Finally got a free night so I'm ready to go hunting now  8)
« Last Edit: June 22, 2016, 07:09:54 AM by Dairyboy »
  • Outlook, WA
John 3:16

.22 SPA M10
.22 JSAR Raptor Mini (on order)
.22 AAA EVOL Tac (on order)

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2019
Re: .30 Mrod
« Reply #32 on: June 21, 2016, 06:44:48 PM »
Looking good D-Boy!  My .30 likes to be floated, too.
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

wilsonj1018

  • Sr. Member
  • ****
  • Posts: 285
Re: .30 Mrod
« Reply #33 on: June 21, 2016, 07:01:20 PM »
Wow man, you kinda got me wanting a mrod lol.
Josh
  • hickory nc

Dairyboy

  • Hero Member
  • *****
  • Posts: 887
Re: .30 Mrod
« Reply #34 on: June 21, 2016, 07:40:51 PM »
 ;D here's some 50yd groups.

Top left is my .22 Mrod 8 shots. Held one Mil dot high. Barrel is dirty and threw 3 high and left but 5 are in one hole so can't complain there. Was a comparison for the .30

Bottom target is polymags 5 shots. Held one Mil dot high. Again I'm thrilled because this was how tight the groups were at 25yds when I first got the barrel.

Last but not least right target 44.75 JSBs 5 shots. Held straight on. One flyer/possibly pulled shot and then 4 nice and tight with 3 making a clover.

And I almost sold these guns what the hell was I thinking  :o Not that a WARP wouldn't have been worth it but I know I woulda regretted letting these go. Maybe I need to get a WARP in .25 to round it off once I ever get money saved up which will be awhile  :(
  • Outlook, WA
John 3:16

.22 SPA M10
.22 JSAR Raptor Mini (on order)
.22 AAA EVOL Tac (on order)

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2019
Re: .30 Mrod
« Reply #35 on: June 21, 2016, 08:12:48 PM »
Yes, a WARPED .25 will be just right in your stable.
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

Dairyboy

  • Hero Member
  • *****
  • Posts: 887
Re: .30 Mrod
« Reply #36 on: September 04, 2016, 03:37:40 PM »
I FINALLY got it all finished and together and with my final Polymag tune! So I have since added a Neil Clague LDC on it and being that it was pretty big in size to tame the report I ended up doing the hobby foam in the barrel band and as you can tell accuracy is great!!! Also did the F.A.M.E. mod and it is super smooth to cock even though I have a short stiff spring in it. Hafta say I'm happy it's finished and now can just enjoy shooting it instead of tinkering.

3 shots of JSB on the left 3 shots of Polymags on the right 25yds. Only 3 shots each as I didn't feel like hand pumping more.

  • Outlook, WA
John 3:16

.22 SPA M10
.22 JSAR Raptor Mini (on order)
.22 AAA EVOL Tac (on order)

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2019
Re: .30 Mrod
« Reply #37 on: September 04, 2016, 03:59:17 PM »
Cool.  Now some pics of the rifle with the can. ;)
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

Aceflier

  • Jr. Member
  • **
  • Posts: 59
Re: .30 Mrod
« Reply #38 on: September 04, 2016, 06:54:22 PM »
Looking just fine!
  • Indiana
1377 .177
Daisy 880
Ruger Blackhawk
'72 Dan
NP XL1100
.25 Mrod 75FPE (Stock parts mods by Shorty tuned by me)
Airforce Texan .457

Dairyboy

  • Hero Member
  • *****
  • Posts: 887
Re: .30 Mrod
« Reply #39 on: September 04, 2016, 07:07:26 PM »
Here she is!

  • Outlook, WA
John 3:16

.22 SPA M10
.22 JSAR Raptor Mini (on order)
.22 AAA EVOL Tac (on order)

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2019
Re: .30 Mrod
« Reply #40 on: September 04, 2016, 07:09:12 PM »
Nice, all sniper like and shiz!  8)
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

caniborrowsomeammo

  • Administrator
  • Hero Member
  • *****
  • Posts: 766
Re: .30 Mrod
« Reply #41 on: September 04, 2016, 07:53:37 PM »
Hot Dam Dillon, looks great. Shoots nice too.
Soon, you  may have to get yerself a tank. Oh, that's right, you are still a yung'un. Keep pumping. ;D
Buncha BB guns that I don't get to shoot as much as I like. Grinding out a living on the farm.

Dairyboy

  • Hero Member
  • *****
  • Posts: 887
Re: .30 Mrod
« Reply #42 on: September 05, 2016, 07:38:25 AM »
Thanks guys I do love the look of it! I wish I could get a tank but where I live the nearest known fill station is 50miles away so id rather have a shoebox but those aren't cheap either. Like you said I'm still young I'll keep pumping  ;D
  • Outlook, WA
John 3:16

.22 SPA M10
.22 JSAR Raptor Mini (on order)
.22 AAA EVOL Tac (on order)

int3man

  • Sr. Member
  • ****
  • Posts: 459
Re: .30 Mrod
« Reply #43 on: September 05, 2016, 09:36:59 AM »
Thanks guys I do love the look of it! I wish I could get a tank but where I live the nearest known fill station is 50miles away so id rather have a shoebox but those aren't cheap either. Like you said I'm still young I'll keep pumping  ;D

Shop for HP 100 Cubic foot tanks!  They fill to 3500 PSI at 100 Cubic foot.  Plus you can cascade them.  If you need help reach out.

Michael :- )
  • Central California
WAR .22 PRod
WAR .25 Marauder
Broadening my Horizions
.22 Brocock Super 6 XL
.25 BSA Scorpion Huma Reg.
.25 Air Arms Extra FAC
.30 Kalibr Cricket
.22 Taipan Mutant Standard

WAR .22 Marauder, Huma, LW Hammer,  Rapid 70 Bull  Stolen
Flex .30  Stolen

Yes I still have an ICQ Number.  Raise your hand if you do.

Bob La Londe

  • Sr. Member
  • ****
  • Posts: 321
    • CNC Molds N Stuff
Re: .30 Mrod
« Reply #44 on: September 07, 2016, 06:48:34 PM »
I just turned 50.  I still have a pump. 

... I don't use it anymore, but I have one.  LOL.

CNC Molds N Stuff
www.cncmolds.com