Author Topic: 1/2-20 adpt for warp- flex  (Read 1204 times)

ironarmknives

  • Guest
1/2-20 adpt for warp- flex
« on: April 24, 2017, 07:32:50 AM »
This is something I had made for the warp gonna try a sumo ldc on it
It will also fit the flex 1/2-20 apt for a ldc
« Last Edit: April 24, 2017, 07:38:10 AM by ironarmknives »



Martin

  • Full Member
  • ***
  • Posts: 237
Re: 1/2-20 adpt for warp- flex
« Reply #1 on: April 24, 2017, 07:40:09 AM »
That must be some really clear plastic.
  • Madera CA
Sheridan Silver Streak
Crossman 760
M-rod .25 Gen 1 STOCK
WARP .25 12" barrel

ironarmknives

  • Guest
Re: 1/2-20 adpt for warp- flex
« Reply #2 on: April 24, 2017, 08:45:13 AM »
 Trying to leave all options on the table I would like to get the 17 inch 22 Warp quiet
 I would like to use the Stocks slip on but we will see how the spiral baffles turn out when they come out  you never know when someone's going to come out with the most awesome LDC in the world and it's going to Have a 1/2-20 threads

ironarmknives

  • Guest
Re: 1/2-20 adpt for warp- flex
« Reply #3 on: April 24, 2017, 08:46:14 AM »
That must be some really clear plastic.
I must be thick I don't understand

farmerjoe99

  • Jr. Member
  • **
  • Posts: 87
    • Discos R Us
Re: 1/2-20 adpt for warp- flex
« Reply #4 on: April 24, 2017, 01:12:25 PM »
I think he's joking with you that is no LDC on the end?
though I could be wrong  ::) ;)
  • Alfred, NY
Airguns: .177 Anschutz 2025, .177 BSA Scorpion SE huma reg, .177 FX whisper T12, .177 Crosman 1720T, .177 regged m-rod, .22 condor, .25 M-rod,
Hill pump, 4500psi Shoebox and JoeB guppy tank
      sold: .177 Daystate cr97, .177 BNM disco, .22 Disco, .25 at44pa, .25 Hatsan BT65 QE

oldpro

  • Guest
Re: 1/2-20 adpt for warp- flex
« Reply #5 on: April 24, 2017, 03:42:42 PM »
 I must be dense I didnt get it either :-[

int3man

  • Sr. Member
  • ****
  • Posts: 459
Re: 1/2-20 adpt for warp- flex
« Reply #6 on: April 24, 2017, 06:01:49 PM »
The poster was implying that the LDC was made out of Plastic.  They did not understand that the post was of the adaptor, and not an installed LDC.
  • Central California
WAR .22 PRod
WAR .25 Marauder
Broadening my Horizions
.22 Brocock Super 6 XL
.25 BSA Scorpion Huma Reg.
.25 Air Arms Extra FAC
.30 Kalibr Cricket
.22 Taipan Mutant Standard

WAR .22 Marauder, Huma, LW Hammer,  Rapid 70 Bull  Stolen
Flex .30  Stolen

Yes I still have an ICQ Number.  Raise your hand if you do.

Dairyboy

  • Hero Member
  • *****
  • Posts: 887
Re: 1/2-20 adpt for warp- flex
« Reply #7 on: April 24, 2017, 09:09:37 PM »
Lol glad I wasn't the only one confused :o
  • Outlook, WA
John 3:16

.22 SPA M10
.22 JSAR Raptor Mini (on order)
.22 AAA EVOL Tac (on order)

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 2614
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: 1/2-20 adpt for warp- flex
« Reply #8 on: April 25, 2017, 04:29:32 AM »
I do not own a Flex or a Warp. But it is my understanding that the suppressor on both models is somewhat quieter than its competition. The Cobra, if it has what Travis say is does, it will be even less noisy. And wouldn't it be nice if you owned a .30 caliber airgun that was backyard friendly? I know I would!
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.