Author Topic: NP2/NPSS Trigger  (Read 1430 times)


  • Newbie
  • *
  • Posts: 40
NP2/NPSS Trigger
« on: March 18, 2016, 03:38:11 PM »
I have written a short tutorial on how to turn the NP2/NPSS trigger into a smooth predictable trigger. This assumes that you know how to get to the trigger and have the necessary tools and are handy. As always, take your time, read several times 'til you are familiar with it. It's easy to take off more, not so much to add it back. I used Ultimox, moly paste would also be good.

Maximus Hunter
4-16X56 UTG
Bushnell 3-12X40 AR 223
Trail NP2 .22
UTG 10X50


  • Jr. Member
  • **
  • Posts: 84
Re: NP2/NPSS Trigger
« Reply #1 on: April 14, 2016, 05:37:59 PM »
Thats a great write up,which I followed from the other board
Its still not a two stage pull by any means,there is no true "stop"
More predictable yes,better then Crosman,yes by bus lengths  ;)
Installed a CBR in my trail,true two stage trigger blade
Acouple of minor tweaks and the stop is very positive with the release at 1.7lbs
Butter doesnt stand a chance on smooth with a CBR on smooth

  • Texas