News:

With the coming of Summer, hunting possibilities change, typically for the better. Prairie dogs, ground squirrels, and gophers are all fair game. And so are pigeons, Eurasian doves, and house sparrows. Oh goody!

Main Menu

Browning Leverage by Umarex

Started by watersteps, December 29, 2021, 12:20:52 PM

Previous topic - Next topic

watersteps

Cleaning and re-sighting my Leverage air rifle and for some reason I can't remember where the spring that contacts the trigger and the power spring lock fits in the rifle.   So, I need a drawing or diagram for the trigger spring location for this springer.  Thanks
If it is broke, I can fix it.
Hug your Air Rifle today and squeeze off a good shot.

watersteps

Hey Guys thanks for reading this post, I figured out the spring placement. Thanks anyway.
If it is broke, I can fix it.
Hug your Air Rifle today and squeeze off a good shot.

Alan

Alan

I have a Hill EC-3000 compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your tank as a courtesy (4,250 PSI limit).

steveoh

I looked but did not find a parts diagram. Probably have to call Pyramyd, though they may be little help.
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
DAQ .58 LA Outlaw Rifle
FX Streamline .25
FX M3 Impact 700mm Sniper .25
Benjamin Bulldog .357
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

nervoustrigger

Here's a little writeup I did on mine back almost 10 years ago...the OEM model Xisico XS46U

Alan

Steve and I might pay the bills here, but I still like the fact we have so many really talented guys, who share their knowledge openly. What great company we keep!
Alan

I have a Hill EC-3000 compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your tank as a courtesy (4,250 PSI limit).

watersteps

Wow, thanks for the come back guys. While I was figuring out the spring placement I remembered I wanted to get a new breach seal. I called Air Gun Depot and found out I needed to call Umarex to purchase a seal. I called and they sent me an e-mail diagram to look at. I picked out the parts I wanted and called back and ordered them, breach seal was $4.45 and the piston seal was $9.95. No back order!!!
OK where does the spring go? The smallest pin in the trigger housing is the pivot point, the long end of the spring will rest on the main spring lock block. The small end hooks into the trigger it's self. You will need to put the pin through the spring and then put the lock block in place. Next you need to hook on to the short end of the spring and pull it up and hook to the trigger notch.
It took me several hours to figure that one out. I will try to attach a picture to another post.
If it is broke, I can fix it.
Hug your Air Rifle today and squeeze off a good shot.

watersteps

The forum will not let me post the print, too large.
If it is broke, I can fix it.
Hug your Air Rifle today and squeeze off a good shot.

watersteps

Great write up nervoustrigger, great pictures. Thanks
If it is broke, I can fix it.
Hug your Air Rifle today and squeeze off a good shot.

steveoh

Quote from: watersteps on January 01, 2022, 08:22:06 AM
The forum will not let me post the print, too large.

You can send to me and I'll resize. Steveoh at bigboreairguns dot net
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
DAQ .58 LA Outlaw Rifle
FX Streamline .25
FX M3 Impact 700mm Sniper .25
Benjamin Bulldog .357
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

watersteps

If it is broke, I can fix it.
Hug your Air Rifle today and squeeze off a good shot.

steveoh

Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
DAQ .58 LA Outlaw Rifle
FX Streamline .25
FX M3 Impact 700mm Sniper .25
Benjamin Bulldog .357
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

watersteps

Thanks steveoh, maybe other Leverage owners can use this.
If it is broke, I can fix it.
Hug your Air Rifle today and squeeze off a good shot.

watersteps

I received my seals from Umarex yesterday, fast shipping and they look great. I think I will wait until it gets above 30 degrees before I go out and shoot this rifle.
If it is broke, I can fix it.
Hug your Air Rifle today and squeeze off a good shot.