Author Topic: Pellets, Oil, and Grease  (Read 1389 times)

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 2475
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Pellets, Oil, and Grease
« on: May 11, 2016, 02:02:56 PM »
I have a good friend who is sort of responsible for me getting into PCPs. And worse, spending big bucks with too many people, especially Travis! In a recent email, he suggested I lube my pellets, and swab the barrel once every 500 rounds or so with oil! Since I've already had an issue with a used PCP where oiled pellets been used, I'm skeptical!

So far, I have shot ±1,000 rounds through my WAR-ized Marauder, and all I have done is put a VERY light daub of silicon grease on the bolt. I haven't lubed of cleaned the barrel, and it appears shiny and clean. It must be, because it puts pellets at 50 yards into one ragged hole.

Since lead is a fairly good lubricant by itself, why would anyone want to lube their pellets or oil the barrel?


  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

wilsonj1018

  • Sr. Member
  • ****
  • Posts: 285
Re: Pellets, Oil, and Grease
« Reply #1 on: May 11, 2016, 02:23:39 PM »
To keep rough, tight, or barrels with tight lands from leading up so quickly.
  • hickory nc

Dairyboy

  • Hero Member
  • *****
  • Posts: 887
Re: Pellets, Oil, and Grease
« Reply #2 on: May 11, 2016, 02:29:30 PM »
Agreed if you had a hammer forged barrel from marmot militia you would understand the need to lube pellets and barrel. Awesome barrels extremely accurate but very tight and need lube to extend cleanings
  • Outlook, WA
John 3:16

.22 SPA M10
.22 JSAR Raptor Mini (on order)
.22 AAA EVOL Tac (on order)

ShakySarge

  • Sr. Member
  • ****
  • Posts: 488
  • Somebody had a bowl of stupid for breakfast!!!!
Re: Pellets, Oil, and Grease
« Reply #3 on: May 11, 2016, 04:29:20 PM »
You are doing EXACTLY what you need to do with your barrel Alan. I too use Standard Green Mountain barrels and anything more than ensuring the bolt/breech O-ring is lubed is unnecessary. Not always the case in other barrels.
  • Clarksville, Tennessee
"It is good that war is so terrible; for we should grow too fond of it." GEN Robert E. Lee

Is it a coincidence that a group of baboons is called a Congress????????

Crotchety geezer

  • Full Member
  • ***
  • Posts: 214
  • I'm not crazy but the voices in my head disagree
Re: Pellets, Oil, and Grease
« Reply #4 on: May 11, 2016, 04:34:11 PM »
Thanks for posting this one. I have read about lubing pellets but never did get far enough into the reading to truly understand the reasoning. Knowing what to check and when to lube makes quite a bit of difference for those like me that are still very much in the learning process! 

Thanks for clearing it up for the rest of us!
  • Plainfield, IL

TexasInfidel

  • Jr. Member
  • **
  • Posts: 84
Re: Pellets, Oil, and Grease
« Reply #5 on: May 11, 2016, 07:03:52 PM »
I learned in my past PCP addiction
Following sheep gets one in a pen.
Much wiser going back in soon

Find a direction and head that way
Only ask questions along the way,questions after the fact are what they are.
DO NOT BE LED,do not follow,be smart not led.

Plenty are eager to spend YOUR money like they did theirs.
Treat air guns like the US government
  • Texas