Author Topic: Hy score 801/D25  (Read 168 times)

Septicdeath

  • Jr. Member
  • **
  • Posts: 74
    • American airguns
Hy score 801/D25
« on: September 10, 2020, 04:20:26 PM »
Septicdeath
Member
I'm looking to rebuild a old Hy score 801. Does anyone know where I can get parts?

It is the German one not the Belgian
« Last Edit: September 14, 2020, 06:10:10 PM by Septicdeath »


  • Pacific Northwest

Septicdeath

  • Jr. Member
  • **
  • Posts: 74
    • American airguns
Re: Hy score 801
« Reply #1 on: September 11, 2020, 07:47:10 PM »
I talked a friend. He told me where the date stamp on this gun was. Checked the entire gun with my optivisors  there is no dare markings.  But from the looks of the rear sight I think it might be a older model???

Removed  the surface rust and will refinish the metal at a later date.
The barrel is in excellent  condition. Cleaned no pitting. Just finished installing a leather seal I made. The chamber and piston was surprisingly clean. Ran some fine steal wool on my flex shaft  into the chamber no rust flashlight showed nice and shiny.

Put it back together. The trigger needs some work but will do it later. Since I will be tearing it apart again soon.

Hopefully  have  located the parts I need. Will know next week when my package arrives. End cap and set screws.

Sill need a pivot bolt screw and some new stock screws.
  • Pacific Northwest

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 2466
    • Airgun FPE Calculator
Re: Hy score 801
« Reply #2 on: September 11, 2020, 08:26:19 PM »
Good for you that you are taking the time and effort to get an old Airgun back up and running.

I have a Diana my Dad got me way back in 1968. Got it apart but need to put back together. One day.
  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
Sam Yang 909s .45
Sam Yang Sumatra .25
RWS Diana 350Magnum Compact Pro .22
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

Septicdeath

  • Jr. Member
  • **
  • Posts: 74
    • American airguns
Re: Hy score 801
« Reply #3 on: September 11, 2020, 08:50:56 PM »
Good for you that you are taking the time and effort to get an old Airgun back up and running.

I have a Diana my Dad got me way back in 1968. Got it apart but need to put back together. One day.

Here's a Winchester 425 did it a few months ago.
« Last Edit: September 11, 2020, 08:57:25 PM by Septicdeath »
  • Pacific Northwest

Septicdeath

  • Jr. Member
  • **
  • Posts: 74
    • American airguns
Re: Hy score 801/D25
« Reply #4 on: September 14, 2020, 06:10:45 PM »
Hy Score/D25 I need a pivot bolt pin. Do you know where to get one or if a pin from another model will work,? Its the only part I can't find. Have looked everywhere. Literally.

Thanks
  • Pacific Northwest