Author Topic: Anyone use Hatsan Vortex Strike Pellets?  (Read 527 times)

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 3059
    • Airgun FPE Calculator
Anyone use Hatsan Vortex Strike Pellets?
« on: August 13, 2021, 07:30:25 AM »
I needed ammo for my Benjamin Bulldog and could not find any JSB’s, but I did find Hatsan Vortex Strike pellets in .35. Price was right, but I’m wondering if anyone is using these things?

I ordered from Amazon well aware that Amazon couldn’t pack a box if their life depended on it. I knew I’d have to put up with a certain amount of damage. Looks like the dents in the tins was about it. Knock on wood.

Looking in the tins I find tons of dirty bits of lead shavings. Hmmm. Also the skirts are a bit ragged.

Until I can find the bullet molds I’m looking for or JSB sends out more pellets, this is it.

« Last Edit: August 13, 2021, 07:32:08 AM by steveoh »


  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
DAQ .58 LA Outlaw Rifle
FX Streamline .25
Sam Yang Sumatra .25
Benjamin Bulldog .357
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

Tinkerer

  • Full Member
  • ***
  • Posts: 128
Glen

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 3059
    • Airgun FPE Calculator
Re: Anyone use Hatsan Vortex Strike Pellets?
« Reply #2 on: August 13, 2021, 03:27:45 PM »
Just curious,  Have you seen these?
https://www.ebay.com/itm/164994641984?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Dbca553f24ea34a29b87989f8e2c866c3%26pid%3D100675%26rk%3D2%26rkt%3D15%26sd%3D184907051014%26itm%3D164994641984%26pmt%3D0%26noa%3D1%26pg%3D2380057%26brand%3DUnbranded%2FGeneric&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3Ad034474b-fc67-11eb-bc1d-f6697a4b04b2%7Cparentrq%3A40dd194a17b0a7b0833ee2d2ffd46e76%7Ciid%3A1

I have a sample he sent along with some cast slugs I had bought from him.  They look better than the Vortex pellets.  I never rememberd to shoot these out of my Bulldog.  Kept forgetting to bring them along!

I actually have some of his slugs and pellets. The quality is severely lacking. I got a batch of slugs that were so wrinkled and with voids they went into my melt box. He sent me replacements but they were terrible also.
  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
DAQ .58 LA Outlaw Rifle
FX Streamline .25
Sam Yang Sumatra .25
Benjamin Bulldog .357
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

bnowlin

  • Hero Member
  • *****
  • Posts: 707
  • Just a Plain Ole Country Boy
Re: Anyone use Hatsan Vortex Strike Pellets?
« Reply #3 on: August 13, 2021, 04:26:13 PM »
Maybe the picture is distorted but the skirts look banged up.
Bobn

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 3059
    • Airgun FPE Calculator
Re: Anyone use Hatsan Vortex Strike Pellets?
« Reply #4 on: August 23, 2021, 09:36:11 AM »
Maybe the picture is distorted but the skirts look banged up.
Bobn

Skirts are all messed up. Lot of trash in these tins. I'll clean them, and lube, then give them a go.
  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
DAQ .58 LA Outlaw Rifle
FX Streamline .25
Sam Yang Sumatra .25
Benjamin Bulldog .357
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 3991
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: Anyone use Hatsan Vortex Strike Pellets?
« Reply #5 on: August 23, 2021, 12:39:02 PM »
This is one of the reasons I switched brands of slugs from FX (whoever makes them), to NSA slugs—just too much chaff or chad as the case may be. The question remains, how do you "clean" them, without distorting them?

There is another issue, I brought up (alluded to perhaps) during the discussion about indexing pellets. The skirt and head outside diameter could be very close from pellet to pellet. But even if they were, the variation in skirt symmetry would negate any effort in "indexing" them for accuracy purposes. Put another way, the methodology of making slugs, tends to be much more precise than those used to make pellets. As Bob mentioned, pellets can indeed be very accurate, the percentage of fliers notwithstanding. And I should add, I have never experienced what I would call a flier, while shooting slugs at targets. If I miss hitting the mark, it is assuredly me, not the slug!
  • Roswell, New Mexico
Alan

I have a Hill EC-3000 compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your tank as a courtesy (4,250 PSI limit).

JungleShooter

  • Newbie
  • *
  • Posts: 18
  • There is a bug. It’s called AG. It bit me! Bad.
Re: Anyone use Hatsan Vortex Strike Pellets?
« Reply #6 on: September 07, 2021, 01:02:59 PM »
Steveoh,

do you have any info on who makes the Vortex pellets?  Like the tin stating "Made in" or "Manufactured by"?

I'm trying to edit a .22 pellet BC table and there are quite a few pellets in the Vortex lineup.

Thanks. 😊

Matthias

  • Lima, PERU

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 3991
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: Anyone use Hatsan Vortex Strike Pellets?
« Reply #7 on: September 07, 2021, 01:23:41 PM »
Vortex is a trademark of Hatsan, and personally, I haven't a clue who actually makes them. They have an 800 number you might call.

HatsanUSA, Inc.
P.O. Box 576
Bentonville, AR 72712

Phone: 1.877.278.4448
  • Roswell, New Mexico
Alan

I have a Hill EC-3000 compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your tank as a courtesy (4,250 PSI limit).

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 3059
    • Airgun FPE Calculator
Re: Anyone use Hatsan Vortex Strike Pellets?
« Reply #8 on: September 07, 2021, 01:31:51 PM »
Steveoh,

do you have any info on who makes the Vortex pellets?  Like the tin stating "Made in" or "Manufactured by"?

I'm trying to edit a .22 pellet BC table and there are quite a few pellets in the Vortex lineup.

Thanks. 😊

Matthias

Made in Argentina.

  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
DAQ .58 LA Outlaw Rifle
FX Streamline .25
Sam Yang Sumatra .25
Benjamin Bulldog .357
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator