Author Topic: 217-30-HP BBTs Now in the NOE Store !!!  (Read 409 times)

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1894
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
217-30-HP BBTs Now in the NOE Store !!!
« on: July 18, 2019, 03:16:54 PM »
The 217-30-FN BBT is once more in the store.... and NEW is the availability of this slug in the RG2 and RG4 moulds, which come with three sets of pins, to cast Hollow Point, Cup Point, or Flat Nose slugs, all from the same mould….

http://noebulletmolds.com/NV/index.php?cPath=24_472

Thanks to Al for taking the plunge to make the RG moulds available....  8)

Bob


  • Coalmont, BC

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 1783
    • Airgun FPE Calculator
Re: 217-30-HP BBTs Now in the NOE Store !!!
« Reply #1 on: July 18, 2019, 05:47:13 PM »
The 217-30-FN BBT is once more in the store.... and NEW is the availability of this slug in the RG2 and RG4 moulds, which come with three sets of pins, to cast Hollow Point, Cup Point, or Flat Nose slugs, all from the same mould….

http://noebulletmolds.com/NV/index.php?cPath=24_472

Thanks to Al for taking the plunge to make the RG moulds available....  8)

Bob

I’ve been waiting for him to refresh inventory of the 65 grain Hollowpoint boattails.

Patiently. Honest.
  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
Sam Yang 909s .45
Sam Yang Sumatra .25
RWS Diana 350Magnum Compact Pro .22
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1894
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: 217-30-HP BBTs Now in the NOE Store !!!
« Reply #2 on: July 18, 2019, 06:03:29 PM »
I'm hoping that when he does, it will be with the new RG moulds, so you can make HPs, Cups, or FN from the same mould….

Bob
  • Coalmont, BC

Steelhead

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 449
    • Born Wild Shooting Chairs
Re: 217-30-HP BBTs Now in the NOE Store !!!
« Reply #3 on: July 18, 2019, 06:06:28 PM »
I hear you there. Being inexperienced I bought the 'Lyman' set up and only one h.p. cavity. I paid a pretty penny for it but I wish it was easier to use and more versatile such as the ones you're speaking of.
  • Petaluma, CA
Airforce Texan .308
Benjamin Armada .25 (sold)
Benjamin Discovery .22
Benjamin Prowler .177
FX Streamline .25
JSA Raptor .22

Born Wild Shooting Chair
Air Venturi compressor

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 1783
    • Airgun FPE Calculator
Re: 217-30-HP BBTs Now in the NOE Store !!!
« Reply #4 on: July 18, 2019, 06:27:17 PM »
I have single molds with the Lyman setup and they are a bit of a pain.

I also have a 4 hole Noe mold with the pins on all bullets and it’s a much better setup.
  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
Sam Yang 909s .45
Sam Yang Sumatra .25
RWS Diana 350Magnum Compact Pro .22
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1894
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: 217-30-HP BBTs Now in the NOE Store !!!
« Reply #5 on: July 18, 2019, 07:30:20 PM »
Until a few days ago, NOE only had the ability to make the RG moulds if the Meplat was 0.200" or larger.... I have been working with Al for about a year now, trying to convince him he needed to come up with thinner (stepped) RG pins that would allow him to make HP moulds for any caliber or Meplat diameter.... He made the first prototype the other day, and these are the first production run using the new thin RG pins.... As with all his RG series moulds, they are supplied with three sets of pins, for a Hollow Point, a Cup Point (short, conical HP) and the original Flat Nose bullet.... You can make all three types from one mould, mix or match pins as you please....

Bob
  • Coalmont, BC

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 1783
    • Airgun FPE Calculator
Re: 217-30-HP BBTs Now in the NOE Store !!!
« Reply #6 on: July 18, 2019, 10:02:57 PM »
Until a few days ago, NOE only had the ability to make the RG moulds if the Meplat was 0.200" or larger.... I have been working with Al for about a year now, trying to convince him he needed to come up with thinner (stepped) RG pins that would allow him to make HP moulds for any caliber or Meplat diameter.... He made the first prototype the other day, and these are the first production run using the new thin RG pins.... As with all his RG series moulds, they are supplied with three sets of pins, for a Hollow Point, a Cup Point (short, conical HP) and the original Flat Nose bullet.... You can make all three types from one mould, mix or match pins as you please....

Bob

This is exciting! Can’t wait for more molds. :)
  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
Sam Yang 909s .45
Sam Yang Sumatra .25
RWS Diana 350Magnum Compact Pro .22
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Calculator