Author Topic: flex ---folding stock adapter ?  (Read 1546 times)

ironarmknives

  • Guest
flex ---folding stock adapter ?
« on: January 08, 2017, 10:24:15 AM »
i want to put a folding stock on the flex any part # out there that u all have tried
without braking the bank ....
i saw utg ra 1a010 but don't know if its the right one because theres rai r018 also ---thens theres the "law tach" something that cost 220. but i just don't know what fits if i did i could look whats the right one that fits please help !!!!!!!



Motorhead

  • Sr. Member
  • ****
  • Posts: 379
  • Older & Slower ... Field Target Shooter
Re: flex ---folding stock adapter ?
« Reply #1 on: January 08, 2017, 01:35:14 PM »
Travis has one ... Male / Female adding @ 2" or so to OAL
  • Old Hangtown ... California
"Home of Motorheads Air Gun Tuning Service"
    ***** Airguns need love too !! *****
http://airgunguild.com/index.php/topic,38.0.html    
Scott


ironarmknives

  • Guest
Re: flex ---folding stock adapter ?
« Reply #3 on: January 08, 2017, 03:00:23 PM »
thanks the reviews on the utg one are not the best they say lots of movement up down as long as its works i guess is there a steel one or a better one made thats in the lower-mid price range that works better or will this one do just fine for the flex its not a ar so maybe them reviews are bullet shooting gun guys if u say this works fine ... heck i guess for 20.00 its worth a try ...... just would like to do this once ....if u know what i mean ...... but now i kinda know what to look for
thanks
clint

Bullfrog

  • Administrator
  • Full Member
  • *****
  • Posts: 131
Re: flex ---folding stock adapter ?
« Reply #4 on: January 08, 2017, 06:52:53 PM »

ironarmknives

  • Guest
Re: flex ---folding stock adapter ?
« Reply #5 on: January 08, 2017, 07:06:04 PM »
i ordered one of  them in the link u sent ,
...... that "hera sfu"   http://www.hera-arms.com/sfu  ,but at 115.00 ...one looks nice we ll see how this one works out if travis said it work i'll give it shot if it doesn't work nice .... i'll get one of them here's i think ....
« Last Edit: January 08, 2017, 07:17:25 PM by ironarmknives »

ironarmknives

  • Guest
Re: flex ---folding stock adapter ?
« Reply #6 on: January 15, 2017, 02:39:38 PM »
ya sent the utg back it wobbled a lot didn't like it... bought the "xlr industries " now i need some scope ring mounts thinking of getting the burris xtr signature  just don't know what hight to get high looks good my swfa 16x i think is going on my slayer .357 when it gets here
might just get another swfa but was looking at the athlon argos .... 8x34x56 or 6x24x50 so i would need the high ring i would think .... 1.5 in. but was looking at other flexes and looks like i could get away with maybe med and still fit mag just don't know if 50-56 will need high...
anyways going shooting now with just the fasefire 3 on the flex.......

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1593
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: flex ---folding stock adapter ?
« Reply #7 on: January 16, 2017, 05:05:21 AM »
Clint, this past weekend was the quarterly gun show here in Roswell, NM. I looked at four different folding stocks and adapters (all I could find at this show), and none of them were what I would call tight. One of them, a UTG stock with a folding hinge, wobbled like a limp.....! No thank you.
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

ironarmknives

  • Guest
Re: flex ---folding stock adapter ?
« Reply #8 on: January 16, 2017, 08:32:27 AM »
ya the only ones i saw that where nicer where the xlr industries . bought it from "red hawk rifles" they where only 107.00 with mil. distcount
and the "hera" at about 115. but could not find any in stock
both the xlr and hera look the same small and tight locking ... i read some where someone put one on the flex looked nice .....
now just need to get a nicer stock ... the one that came with my flex rattles like heck ..... just waiting to find one on sale craigslist
thinking about getting a leshiy so money is tight .... just love the compact .22 for the yard and jeep dove hunting ..LOL
then ...... i should be done for a while ....
flex .25.. .30 and maybe 308  100 +yrd rabbits, turkey, dove... bench fun this is a nice shooter ....
slayer .357 hogs.. and just blowing my gun friends minds ...LOL
leshiy .22 20-70yrd... dove, backyard and jeep fun

Legalair

  • Newbie
  • *
  • Posts: 1
  • Middle River, Maryland