Author Topic: 308 on the warp ?  (Read 1779 times)

ironarmknives

  • Guest
308 on the warp ?
« on: December 26, 2016, 09:06:50 AM »
ok have the funds to get something nice now .... can the 308 go on the warp with a 480cc cc bottle i really want a 357 i would rather have the 100 yd knock down power than the long shot stuff ...is there going to be a 357 ...... and i like the warp size frame better than the flex but don't know and can't find that info out will the longer 308-357 go on the warp..... i have a vulcan .25 but would sell it if the warp could do the 308 that way just one gun thing for hunting .25 or .30 and a 357 or 308 .... i was looking at the american arm slayer 357 and keeping the vulcan .25 for hunting pig, deer.....and the prod .22 for the at home plinking "dove, rabbit " .... just not fond of the flex frame that much .... so u all see where my mine is all f--- up LOL is there any help with this...... please got the money thought that was the hard part now its how do i spend it right LOL thats even harder LOL



Motorhead

  • Sr. Member
  • ****
  • Posts: 386
  • Older & Slower ... Field Target Shooter
Re: 308 on the warp ?
« Reply #1 on: December 26, 2016, 09:42:21 AM »
Not to place words in Travis's mouth ... In our taking about the WarP in regulated mode he had stated the .30 while it was doable fell short in the power and WAS NOT able to make FLEX's power due to the lower plenum volume.
.25 cals do excellent tho  8)

Just sharing a previous discussion had ...
  • Old Hangtown ... California
"Home of Motorheads Air Gun Tuning Service"
    ***** Airguns need love too !! *****
http://airgunguild.com/index.php/topic,38.0.html    
Scott

ironarmknives

  • Guest
Re: 308 on the warp ?
« Reply #2 on: December 26, 2016, 11:00:41 AM »
ya thats what i was thinking ..... theres a used flex in .30 with one stage trigger can the two stage be put in it .... looks like i would have to get the flex ... just wanted a .357 but if i knew anything LOL does the 308 do as well .... i love the short vulcan .25 might just have to keep it .... and get the flex .... the slayer bullpup just looks so cool i gave up all my blackguns and military looking guns in calif san diego they just don't fit the times i guess was never a fan of them anyways i'm a pump shotgun and 45acp man ... love the airgun sport and want the wow factor when going out with the army friends to shoot ... hole on hole is important to me ..... the evanix and airforce rifles one shot thing and look don't do it for me ..... so its the more than one barrel that keeps me coming back to the flex not the look it would be nice to hold one that would help they just look bigger than i was looking for  ..... thank u for replying back your the man when it comes to airguns
i plan on some pig hunts and others out of calif... soon sold a leather sewing machine to get the funds ... and it burning a hole in my pocket LOL i don't need the .22 or .25 because of what i have already .... just trying to be a one gun guy but that might be wrong thinking because of  scope settings and stuff .... if i knew flex would be doing a .357 i would get the .30 flex and wait for the .357
hell i might even just get the .45 cal slayer love the big cal LOL would not use it much but do u ever use the hunting rifle but when hunting LOL 

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1791
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: 308 on the warp ?
« Reply #3 on: December 26, 2016, 12:23:10 PM »
If you look around the Guild, you'll find the answers you seek. If all else fails, call Travis and ask him.

I think the single stage Flex you referred to is the one on Air Nation. If it is, I believe the owner changed from the original trigger.
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1791
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: 308 on the warp ?
« Reply #4 on: December 27, 2016, 05:37:30 AM »
Speaking of myself, I don't think I'll opt for a .30 cal. I have a 9 mm Korean gun, but about the only place I can shoot it is way out in the open due to the noise it makes, the LDC notwithstanding. Then there is the issue of maximum pellet flight. In an exurban area where I do most of my shooting, noise is a major factor, and so is the distance of possible flight.
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

ironarmknives

  • Guest
Re: 308 on the warp ?
« Reply #5 on: December 27, 2016, 04:28:54 PM »
Bought a flex .30 today
Will order another barrel tomorrow

Motorhead

  • Sr. Member
  • ****
  • Posts: 386
  • Older & Slower ... Field Target Shooter
Re: 308 on the warp ?
« Reply #6 on: December 27, 2016, 04:55:56 PM »
Bought a flex .30 today
Will order another barrel tomorrow

New one or used ?
  • Old Hangtown ... California
"Home of Motorheads Air Gun Tuning Service"
    ***** Airguns need love too !! *****
http://airgunguild.com/index.php/topic,38.0.html    
Scott

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1995
Re: 308 on the warp ?
« Reply #7 on: December 27, 2016, 05:20:48 PM »
Bought a flex .30 today
Will order another barrel tomorrow

Nice! 

Joe
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

ironarmknives

  • Guest
Re: 308 on the warp ?
« Reply #8 on: December 28, 2016, 04:16:51 AM »
Used the tan one #xxxx20 or 28 can't tell
That was on air gun nation for sale
sold my vulcan.25 today also my prod today
so after doing about 10 hours reading i think i'll keep this flex in .22 .25.30 as the power house gun it is ... and not get the 308 0r a 357 barrel for it ,the guns to nice as a carbine power house ,and to try to get the power i want out of a 308-357 this is not the platform for that i think it would make a mild power house out of a great gun  ok for small 70-80 gr bullet but not the 136 gr 357 i want .... so i ordered a slayer 357 today and now have the best .22-.25.30 in the flex and one of the best in .357 in the slayer so thats it for air guns for a while
i'll get the .22 barrel kit first from wicked next week ... after i sell a knife ... i hate buying new stuff it makes my mined have to think to much .... but i think i did the right thing now i'll have to save for more bullets and a air compressor , i get free air now but i think i'll be using more LOL

« Last Edit: December 29, 2016, 07:22:01 PM by ironarmknives »