Author Topic: .177 Regulated Rifle Build  (Read 2877 times)

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 359
  • Ricky B
Re: .177 Regulated Rifle Build
« Reply #30 on: November 28, 2017, 07:40:33 AM »
Well the rifle is apart for the metal finishing. I got my CF tube in to sleeve the barrel. It's makes the barrel looks massive. It's a 16x20 tube, so over 3/4" in diameter.


CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177, Custom regulated .177, 850 Hammerli .177

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 359
  • Ricky B
Re: .177 Regulated Rifle Build
« Reply #31 on: November 28, 2017, 04:22:04 PM »
Used Loctite 638 to glue the CF tube to the barrel and let it set  for 3 hours. Now I'm post curing it with a heating pad for an hour at 100°.

CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177, Custom regulated .177, 850 Hammerli .177

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1448
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: .177 Regulated Rifle Build
« Reply #32 on: November 28, 2017, 05:29:17 PM »
Nicely done!.... I like using Loctite 638 for that job.... good idea using a heating pad for the post-cure.... That 20mm OD sure looks massive, doesn't it?.... I have that for my upcoming 6mm and .257 builds for this winter.... except the CF tube is 3mm wall and the barrels are only 14mm OD....

Bob
  • Coalmont, BC

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1980
Re: .177 Regulated Rifle Build
« Reply #33 on: December 06, 2017, 07:52:04 PM »
Very nice work.
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

oldpro

  • Hero Member
  • *****
  • Posts: 1220
Re: .177 Regulated Rifle Build
« Reply #34 on: December 07, 2017, 10:48:07 AM »
 Good stuff!!!
  • Mount Shasta Ca.

triggertreat

  • Newbie
  • *
  • Posts: 11
Re: .177 Regulated Rifle Build
« Reply #35 on: December 09, 2017, 07:58:28 AM »
Great build and beautiful gun!!!
  • Nashville, TN
Romans 8:1-11

22 Synrod Unregulated. Tuned using JSB 18.13gr:
30 Shots @ 31.02 FPE Avg., 1.36% ES (12 FPS), 1.58 FPE/CI
Mods: ART TSS & MDS hammer, MMHF barrel, Stock 25 cal. Valve spring, (w/Stock .22 TP, Valve & Porting)

25 Synrod Regulated. Tuned using JSB MKIIs:
24 Shots @ 55.92 FPE Avg., 2.08% ES (18 FPS), 1.45 FPE/CI
Mods: ART SS valve, TSS & MDS hammer, Hill Gauge port, Huma reg., .220 Porting

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 359
  • Ricky B
Re: .177 Regulated Rifle Build
« Reply #36 on: January 08, 2018, 03:19:54 PM »
Ok I got all my parts back from the anodizing and Hydrodipping. Tried to take some pictures this evening and the long shadows make it tough to get good pics. Anyways after I had the breech, lower piece that holds all guts and the air tube anodized I took the air tube and shroud to the hydrodipper and had a carbon fiber applied to them. I'm really happy how it turned out.




CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177, Custom regulated .177, 850 Hammerli .177

Steelhead

  • Full Member
  • ***
  • Posts: 135
Re: .177 Regulated Rifle Build
« Reply #37 on: January 08, 2018, 05:25:31 PM »
uhhh...wow. That's beautiful
  • Petaluma, CA
Airforce Texan .308
Benjamin Armada .25
Benjamin Prowler .177
Air Venturi compressor

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1448
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: .177 Regulated Rifle Build
« Reply #38 on: January 08, 2018, 09:52:34 PM »
Really nice, Ricky.... you can be proud of that one, for sure....

Bob
  • Coalmont, BC

Christopher

  • Sr. Member
  • ****
  • Posts: 383
Re: .177 Regulated Rifle Build
« Reply #39 on: January 09, 2018, 02:54:38 AM »
That turned out real nice, great job.

Chris
  • dead end road KY

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 359
  • Ricky B
Re: .177 Regulated Rifle Build
« Reply #40 on: January 09, 2018, 04:54:57 AM »
Thanks guys. It's been in the works for over a year. I started drawing prints and machining parts as I could when I could afford to buy parts like the barrel and trigger. Been working up to 3 jobs just to make ends meet and saving money when I could to get parts.
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177, Custom regulated .177, 850 Hammerli .177

oldpro

  • Hero Member
  • *****
  • Posts: 1220
Re: .177 Regulated Rifle Build
« Reply #41 on: January 09, 2018, 05:43:02 PM »
 Nice!!! Thats a beauty!!!
  • Mount Shasta Ca.

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 359
  • Ricky B
Re: .177 Regulated Rifle Build
« Reply #42 on: January 14, 2018, 10:35:28 AM »
Again thanks everyone.

I did some testing this morning with AA 8.4 and 10.3 pellets. I shot 20 rounds of each at different velocities and this is the best I have for now.

AA 8.4
817
806
808
807
811
811
812
809
812
814
806
807
814
808
809
809
801
805
808
810
Highest 817
Lowest 801
Average 809
Extreme spread 16
SD 3

The target, 30yards,  2 sight in shots at the bottom, 18 shots at the crow, the gray area is the size of a dime, 16 shot under a dime with 2 flyers.
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177, Custom regulated .177, 850 Hammerli .177

Nvreloader

  • Jr. Member
  • **
  • Posts: 78
Re: .177 Regulated Rifle Build
« Reply #43 on: January 21, 2018, 07:22:24 PM »
Ricky

That is one build you can be VERY proud of, Outstanding and I love the Blue/Silver Grey colors.  8)

Tia,
Don
  • Western NV
NRA Life member

"We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker.
It is time to restore the American precept, that each individual is accountable for their actions"
Ronald Reagan

"Speeds fine, but Accuracy is final"

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 359
  • Ricky B
Re: .177 Regulated Rifle Build
« Reply #44 on: January 28, 2018, 04:40:44 PM »
Ok I recrowned the barrel. I didn't like the way it looked. I did something wrong it's not shooting as good as last time. The velocity changed on me. I only took the upper portion apart but the FPS went up for some reason. I know it likes 800-820 fps it was hitting as high as 849.  Maybe it was the baffles removed. Could be just breaking in after the anodizing.
Anyways made a video and a spread sheet.




CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177, Custom regulated .177, 850 Hammerli .177