American Air Arms

predator-pellets

Neil Clague Air Strippers, Shrouds and LDCs

windmeister-ad

Wicked Air Rifles - Flex

Marmot Militia Machine Works

Author Topic: .177 Regulated Rifle Build  (Read 1412 times)

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 306
  • Ricky B
    • View Profile
Re: .177 Regulated Rifle Build
« Reply #30 on: November 28, 2017, 07:40:33 AM »
Well the rifle is apart for the metal finishing. I got my CF tube in to sleeve the barrel. It's makes the barrel looks massive. It's a 16x20 tube, so over 3/4" in diameter.


CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 306
  • Ricky B
    • View Profile
Re: .177 Regulated Rifle Build
« Reply #31 on: November 28, 2017, 04:22:04 PM »
Used Loctite 638 to glue the CF tube to the barrel and let it set  for 3 hours. Now I'm post curing it with a heating pad for an hour at 100°.

CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

rsterne

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1251
  • Mozey-On-Inn and see what Coalmont has to offer!
    • View Profile
    • Mozey-On-Inn
Re: .177 Regulated Rifle Build
« Reply #32 on: November 28, 2017, 05:29:17 PM »
Nicely done!.... I like using Loctite 638 for that job.... good idea using a heating pad for the post-cure.... That 20mm OD sure looks massive, doesn't it?.... I have that for my upcoming 6mm and .257 builds for this winter.... except the CF tube is 3mm wall and the barrels are only 14mm OD....

Bob
  • Coalmont, BC

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1862
    • View Profile
Re: .177 Regulated Rifle Build
« Reply #33 on: December 06, 2017, 07:52:04 PM »
Very nice work.
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

oldpro

  • Hero Member
  • *****
  • Posts: 1146
    • View Profile
Re: .177 Regulated Rifle Build
« Reply #34 on: December 07, 2017, 10:48:07 AM »
 Good stuff!!!
  • Mount Shasta Ca.

triggertreat

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: .177 Regulated Rifle Build
« Reply #35 on: December 09, 2017, 07:58:28 AM »
Great build and beautiful gun!!!
  • Nashville, TN
Romans 8:1-11

22 Synrod Unregulated. Tuned using JSB 18.13gr:
30 Shots @ 31.02 FPE Avg., 1.36% ES (12 FPS), 1.58 FPE/CI
Mods: ART TSS & MDS hammer, MMHF barrel, Stock 25 cal. Valve spring, (w/Stock .22 TP, Valve & Porting)

25 Synrod Regulated. Tuned using JSB MKIIs:
24 Shots @ 55.92 FPE Avg., 2.08% ES (18 FPS), 1.45 FPE/CI
Mods: ART SS valve, TSS & MDS hammer, Hill Gauge port, Huma reg., .220 Porting