Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - mcc1961

Pages: [1] 2 3
1
.25 boat tail mold 2 cavity and  .25 round ball mold with 1 set of handles used  FREE SHIPPING.The boat tail is 41 grain.Want to sell it all together for $80.

2
Airgun Ammo / Temperature probe holder for lead furnace
« on: April 14, 2017, 02:59:08 PM »
I found a part at Lowe's to make a holder for the temp probe and it was only $2.50 total.Had to take the Lyman mag 25 apart some but it was easy to do.Bottom picture is the part from Lowe's.

3
Airgun Optics and Accessories / Cell phone scope adapter
« on: April 06, 2017, 10:52:46 AM »
I ordered a cell phone scope adapter off ebay that was supposed to work with a rifle scope.I got it and it was too close to the scope eyepiece and would not work at all.These scope adapters will work on spotting scopes ,telescopes ,microscopes and binoculars not rifle scopes.I decided to make one like some people have made on youtube using a 1 1/4" coupling hose with 2 clamps ,a 1" pvc end cap with a threaded hole in it a phone case and a pack of screws.All the parts from lowes were less than $9 ,already had the cell phone case.It works great and only took about 20 minutes to put together.

4
Airgun Ammo / .25 round ball mold
« on: March 19, 2017, 04:16:03 AM »
Does anyone know where I can get a .25 round ball mold?

5
Ask Bob / NOE push through sizer
« on: November 20, 2016, 12:10:58 PM »
I have an NOE push through sizer and was wondering if I need to lube the bullets to use with it?

6
Ask Bob / Shoebox silicone oil???
« on: November 04, 2016, 09:21:49 AM »
I was looking to get some RC shock absorber oil to use on my shoebox pump ,what weight should I get 20 or 40?

7
Ask Bob / Hatsan AT44 .25 valve stem
« on: November 01, 2016, 10:28:08 PM »
How much metal can you take off a Hatsan AT44 .25  valve stem without weakening it too much?

8
Ask Bob / Hatsan AT44 .25
« on: October 29, 2016, 01:28:06 AM »
I was wanting to know if anyone had tried to cut a coil or 2 off a Hatsan AT44 valve spring?Would it work or would it dump the whole tank at once?

9
Airgun Optics and Accessories / $200 spotting scope
« on: October 28, 2016, 06:46:31 PM »
I was wanting to know if anyone knows a good spotting scope that is around $200 and will reach out to around 150 to 200yds?I was looking for a Nikon but they are almost double my budget.What would be the best power of magnification for this yardage?

10
PCP, C02, and Helium Powered Airguns / Hatsan AT44 trigger pull
« on: October 20, 2016, 11:56:41 AM »
I have got to use a trigger pull scale on my .25 AT44 and the pull is 1 pound and 2 ounces.I would never have thought a factory Hatsan trigger would go that low!

11
Airgun Ammo / NOE Push through adjustable sizing die
« on: September 10, 2016, 06:39:02 PM »
NOE bullet molds has an adjustable sizing die.I got one for .25 and 3 different size bushings which are in the front of the pic.I have a Lee sizer but i think it works on other brands.

12
Airgun Hunting / Squirrels fight back!!!
« on: September 07, 2016, 10:38:16 PM »
Squirrels are fighting back!!!

13
PCP, C02, and Helium Powered Airguns / Shoebox pump
« on: September 03, 2016, 06:38:33 PM »
I have a Shoebox pump and am about out of silicone oil.Do I need to get the replacement oil from Shoebox or can I get some  aftermarket oil off the internet or at an  auto supply store?
Modify message

14
Big Bore Airguns / Arrow for .50 airguns
« on: August 08, 2016, 02:22:40 AM »
Check out this new way to shoot arrows!!

15
PCP, C02, and Helium Powered Airguns / AT44 10 QE Long .25
« on: July 30, 2016, 08:51:18 AM »
I got the 3 holes plugged in my Hatsan at44 .25 air tube.Have to wait till tomorrow to shoot it while the loctite dries.Am anxious see what effect it has on the shot count and Velocity.

Pages: [1] 2 3