Author Topic: HuMa's NEW Air tube pressure gauge for Marauders !!!  (Read 242 times)

Motorhead

  • Sr. Member
  • ****
  • Posts: 428
  • Older & Slower ... Field Target Shooter
HuMa's NEW Air tube pressure gauge for Marauders !!!
« on: February 28, 2019, 04:53:22 PM »
Just what we needed for REGULATED marauders ... a pressure gauge that reads High Side storage pressure !
One installed you have constant access to what air is left in tank and can weigh that against what factory gauge states for regulated pressure.
These screw on replacing the factory end cap & foster fill.  These use a probe ( Same size as Crickets ) and have an outer sleeve that rotates to cove the probe port keeping debris out.
* As shown ( I decided ) to keep the probe in and safety tied it in place covered with a simple cap.
** gun shown a heavily modified gen1 with a JSAR XL aluminum air tube.  ( These fit Gen1 or Gen 2 guns, Oem or After market tubes )

These can be had direct or from your HuMa dealers.
See: https://www.huma-air.com/Benjamin-Marauder-Quickfill-With-Pressure-Gauge


  • Old Hangtown ... California
"Home of Motorheads Air Gun Tuning Service"
    ***** Airguns need love too !! *****

Nicesurprice

  • Newbie
  • *
  • Posts: 46
Re: HuMa's NEW Air tube pressure gauge for Marauders !!!
« Reply #1 on: March 01, 2019, 01:31:23 AM »
Huub makes great stuff.
Started as an hobbyist in the lathe.
Now a serieus party working with air arms and making lots f stuff.
And when not for sale.
Send m a message ans he will make it for you when possible.
  • Noord Brabant
It's not about the destination; it's about the journey

d_boom

  • Full Member
  • ***
  • Posts: 106
Re: HuMa's NEW Air tube pressure gauge for Marauders !!!
« Reply #2 on: March 01, 2019, 07:15:58 AM »
I just ordered a regulator for my Marauder, I was giving up the pressure gauge reading the air pressure left in the tank,
now I don't have to.  Great idea. 
  • Wichita, Kansas

Frank in Fairfield

  • Jr. Member
  • **
  • Posts: 74
Re: HuMa's NEW Air tube pressure gauge for Marauders !!!
« Reply #3 on: March 01, 2019, 09:47:02 AM »
Ordered.
AA TX200 MKIII, .177
Baikal IZH46M w/Steve Corcoran Furniture
Beeman R1, San Rafael, .177
Benjamin Sheridan Blue Streak, Williams Peep
Benjamin Marauder Gen I, .177 w/Boyd's Stock
Benjamin Marauder Gen I, .22   w/Boyd’s Stock
Benjamin Marauder Gen I, .25   w/TEREX Stock
Crosman 1720T, Alchemy AirWerks Grips & Forearm
Crosman 2300S
Daisy Model 25, Variant #7
Daisy Red Ryder
FWB300S
HW35E, .177, Beeman/Williams Peep/12fpe VORTEK
RWS Diana 52, .177
Bug-a-Salt

d_boom

  • Full Member
  • ***
  • Posts: 106
Re: HuMa's NEW Air tube pressure gauge for Marauders !!!
« Reply #4 on: March 01, 2019, 02:05:29 PM »
Are these new air tube pressure gauges for the Marauder stocked by anyone in the USA?
  • Wichita, Kansas

Motorhead

  • Sr. Member
  • ****
  • Posts: 428
  • Older & Slower ... Field Target Shooter
Re: HuMa's NEW Air tube pressure gauge for Marauders !!!
« Reply #5 on: March 01, 2019, 03:22:33 PM »
Are these new air tube pressure gauges for the Marauder stocked by anyone in the USA?

 No clue ... 1st place to inquire would be Trenier Outdoors
  • Old Hangtown ... California
"Home of Motorheads Air Gun Tuning Service"
    ***** Airguns need love too !! *****

bnowlin

  • Sr. Member
  • ****
  • Posts: 472
  • Just a Plain Ole Country Boy
Re: HuMa's NEW Air tube pressure gauge for Marauders !!!
« Reply #6 on: March 01, 2019, 07:33:22 PM »
Trenier has them but I already made one small fitting and gauge that come out the side so I can see it.
Bob

Frank in Fairfield

  • Jr. Member
  • **
  • Posts: 74
Re: HuMa's NEW Air tube pressure gauge for Marauders !!!
« Reply #7 on: March 12, 2019, 02:45:41 PM »
Came today.
I ordered on the 1st.
They shipped on the 3rd.
New York Customs for three days.
Easy to install, even for me...
It uses a Cricket type probe..
AA TX200 MKIII, .177
Baikal IZH46M w/Steve Corcoran Furniture
Beeman R1, San Rafael, .177
Benjamin Sheridan Blue Streak, Williams Peep
Benjamin Marauder Gen I, .177 w/Boyd's Stock
Benjamin Marauder Gen I, .22   w/Boyd’s Stock
Benjamin Marauder Gen I, .25   w/TEREX Stock
Crosman 1720T, Alchemy AirWerks Grips & Forearm
Crosman 2300S
Daisy Model 25, Variant #7
Daisy Red Ryder
FWB300S
HW35E, .177, Beeman/Williams Peep/12fpe VORTEK
RWS Diana 52, .177
Bug-a-Salt

steveoh

  • Administrator
  • Hero Member
  • *****
  • Posts: 1334
    • Airgun FPE Calculator
Re: HuMa's NEW Air tube pressure gauge for Marauders !!!
« Reply #8 on: March 12, 2019, 04:30:45 PM »
Came today.
I ordered on the 1st.
They shipped on the 3rd.
New York Customs for three days.
Easy to install, even for me...
It uses a Cricket type probe..

Good looking Marauder. That red stock is mighty purty.

Is it me, or do other folks get a queasy feeling looking at a gauge that puts your head in direct line of the muzzle?
  • Benicia, California
Quackenbush .58 Outlaw
Shooting Chairs
Vallejo Ferry Schedule
DAQ .458 LA Outlaw Rifle
Sam Yang 909s .45
Sam Yang Sumatra .25
RWS Diana 350Magnum Compact Pro .22
QB-79 .177
Crosman 1322
Crosman 1377 - HoRodded 10 FPE
Diana Model 27 (childhood airgun)
Tolman Skiff
Airgun Giveaway