Author Topic: Bottled Mrod kits Pricing added Buyers list order! Deadline is January 16 2017 (Read 10740 times)

Dairyboy · « **on:** December 26, 2016, 03:33:44 PM »

**Monkeydad1969 is taking this over as I am out of this buy in as money was needed and the gun that this was going on was sold**

In order for Travis to do this for us we need to get everything we want together on the order. So if you want one reply to this post with what you want. I'm assuming that means if you want just the tube and bottle adapter or if you want the bottle and maybe a regulator. *Gen 2 ONLY* I think a deadline should be made on this so we can get this rolling. A week after all the holidays should be plenty of time for those interested.

Pricing as follows
$150 for drop down
$85 for pressure tube
$195 for carbon bottle
$30 for bottle adapter
$100 for regulator

List:

1.JTB530: drop down and pressure tube with CF bottle and regulator
2. Christopher: 2 drop downs and pressure tubes
3. kzz1kaw: drop down and pressure tube
4. Alextermination: drop down and pressure tube
5. Monkeydad1969: 2 drop downs and pressure tubes

oldpro · « **Reply #1 on:** December 26, 2016, 03:39:56 PM »

Great idea

JTB530 · « **Reply #2 on:** December 26, 2016, 10:55:59 PM »

1. Dairyboy: Gen 2 kit with CF bottle and regulator
2. JTB530: Gen 2 kit with CF bottle and regulator

oldpro · « **Reply #3 on:** December 27, 2016, 10:10:09 AM »

I will not be making gen 1bottle kits so please dont ask as I am no longer set up to do so.

critter · « **Reply #4 on:** December 27, 2016, 06:11:09 PM »

Is the drop down made from T7075 as per original design that underwent failure testing with FEA software package??

Bob La Londe · « **Reply #5 on:** December 28, 2016, 07:25:31 AM »

DairyBoy, I wanted to get in on this, but I never got a cost and I asked twice.

So, how much, and what exactly is included in that amount?

Dairyboy · « **Reply #6 on:** December 28, 2016, 01:16:50 PM »

Prices added guys

rsterne · « **Reply #7 on:** December 28, 2016, 01:31:57 PM »

I assume a "kit" is the drop down plus a pressure tube for $235 ?....

Bob

Dairyboy · « **Reply #8 on:** December 28, 2016, 01:36:48 PM »

Correct Bob. At least that's how I meant it

Bob La Londe · « **Reply #9 on:** December 28, 2016, 02:53:44 PM »

What is the size, pressure rating, and thread of the CF bottle?

Is the regulator available in either 5/8 or M18 on the bottle side?

I assume (

) the adapter is not needed if the regulator is used.

oldpro · « **Reply #10 on:** December 28, 2016, 06:39:22 PM »

bottle is 480cc carbon with m18 thread and I have regs for all thread patterns. Adapter is not needed for bottle if reg is used.

Bob La Londe · « **Reply #11 on:** December 29, 2016, 07:22:37 AM »

Just one more question I think. What is the pressure rating of the bottle (repeat) and if the bottle is rated to handled greater than 200 bar (3000 PSI apx) is the regulator designed to handle greater input pressure as well?

P.S. I am probably in for a "kit", but bottle, regulator, adaptor depend on stuff I don't yet know.

Dairyboy · « **Reply #12 on:** December 29, 2016, 07:29:01 AM »

Bottles are 250 bar and I believe regulators can handle that much pressure. Same stuff they use on the Flex and WARP

oldpro · « **Reply #13 on:** December 29, 2016, 08:23:30 AM »

3700psi max on bottle and 4500 on reg.

Bob La Londe · « **Reply #14 on:** December 29, 2016, 08:52:34 AM »

Ok I am in.

Tube, Drop Block, Bottle, Regulator set at 2500 PSI.

Now I am excited to get on this. I plan to use it to replace the bottle setup on my .25.

Then I'll swap my current bottle setup over to my .177 Marauder. It gets about 90 (+/-) shots at 20+ FPE now. With a bottle kit it might get 200. LOL. (Its internally regulated to 1900 PSI.)

Sorry guys. I have to drop out.

The AirGun Guild

Airgun Guild Giveaway & Contest

Win this Benjamin Fortitude outfitted with a bunch of goodies!

Airgun Guild Giveaway & Contest

News: