American Air Arms

predator-pellets

Neil Clague Air Strippers, Shrouds and LDCs

windmeister-ad

Wicked Air Rifles - Flex

Marmot Militia Machine Works

Author Topic: 850 Hammerli  (Read 438 times)

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 299
  • Ricky B
    • View Profile
850 Hammerli
« on: September 09, 2017, 06:25:29 PM »
I had a 850 Hammerli giving to me today. It was in the Harvey flood. The man that owned it was letting an elderly gentleman use it at our monthly shoots. The elderly man kept in a case and you can see it on the barrel. The guy that owned it just bought the elderly man a new and gave me the old.
Took it apart and cleaned everything. All seems fine. I plan on putting a CF tube on the barrel and make a HPA tube to convert it to air. Also make a LDC for it.

https://www.dropbox.com/s/rfizvn61sycoyaf/20170909_123215.jpg?dl=0
https://www.dropbox.com/s/e19oxp6eoedw6g3/20170909_123221.jpg?dl=0
https://www.dropbox.com/s/9eh4j55eb46ei5n/20170909_123239.jpg?dl=0



« Last Edit: September 10, 2017, 11:40:50 AM by sixshootertexan »


CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

Alan

  • Hero Member
  • *****
  • Posts: 1305
  • Set the example... Don't be one!
    • View Profile
    • Mobile Amateur Radio
Re: 850 Hammerli
« Reply #1 on: September 10, 2017, 05:49:13 AM »
Where's the beef? (photos actually)
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 299
  • Ricky B
    • View Profile
Re: 850 Hammerli
« Reply #2 on: September 10, 2017, 10:09:27 AM »
I see the photos. You don't? Let me know what's going on.
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

Alan

  • Hero Member
  • *****
  • Posts: 1305
  • Set the example... Don't be one!
    • View Profile
    • Mobile Amateur Radio
Re: 850 Hammerli
« Reply #3 on: September 10, 2017, 11:15:22 AM »
All I see are question marks.
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

Christopher

  • Sr. Member
  • ****
  • Posts: 322
    • View Profile
Re: 850 Hammerli
« Reply #4 on: September 10, 2017, 07:26:16 PM »
Photos are working now....nice grab btw :)

Chris
  • dead end road KY

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 299
  • Ricky B
    • View Profile
Re: 850 Hammerli
« Reply #5 on: October 07, 2017, 11:44:15 AM »
Looking for the valve oring. I know it's a 8mmx2mm, I know the part number 465.60.80.2. Question is what material and hardness is it? I tried a 70 Buna and it seemed to work. I shot around 7 mags thru it and next time I picked it up it was empty. Installed a new Co2 cartridge and it leaked right out. I've wasted 4 of these 90gr ones working on it. I can't find any factory orings in the US.

Ricky
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 299
  • Ricky B
    • View Profile
Re: 850 Hammerli
« Reply #6 on: November 03, 2017, 03:55:45 PM »
I got this rifle finished up. Glued a Carbon Fiber tube over the barrel with green Loctite, and baked it in the oven to cure it. Made the LDC and wrapped it using car wrap material with a carbon fiber look. After looking at the internals I decided not to switch it to HPA but made a refillable cartridge for it. Target is 1 mag of 8 CPHP's 7.9gr @30 yards.
Think I'll name it Harvey.








CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

Nvreloader

  • Jr. Member
  • **
  • Posts: 60
    • View Profile
Re: 850 Hammerli
« Reply #7 on: November 08, 2017, 03:21:25 PM »
Ricky
Very nice and sharp looking.

A couple of questions for you,
What did you use the raise the comb height,
and your refillable cylinder, Co2 or Hpa?

Tia,
Don
  • Western NV
NRA Life member

"We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker.
It is time to restore the American precept, that each individual is accountable for their actions"
Ronald Reagan

"Speeds fine, but Accuracy is final"

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 299
  • Ricky B
    • View Profile
Re: 850 Hammerli
« Reply #8 on: November 09, 2017, 04:55:04 AM »
 I stayed with CO2. The stock is a factory stock did not change anything.
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

Nvreloader

  • Jr. Member
  • **
  • Posts: 60
    • View Profile
Re: 850 Hammerli
« Reply #9 on: November 09, 2017, 06:39:38 AM »
Ricky

Thank you for the info,
that my be my next AR, I like the looks of it.

Do you remove the cylinder to refill with Co2?

Tia,
Don
  • Western NV
NRA Life member

"We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker.
It is time to restore the American precept, that each individual is accountable for their actions"
Ronald Reagan

"Speeds fine, but Accuracy is final"

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 299
  • Ricky B
    • View Profile
Re: 850 Hammerli
« Reply #10 on: November 09, 2017, 07:35:32 AM »
No just refill while still in the rifle.
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

Nvreloader

  • Jr. Member
  • **
  • Posts: 60
    • View Profile
Re: 850 Hammerli
« Reply #11 on: November 10, 2017, 07:07:23 AM »
Thanks Ricky

If would like to give the info on how you installed the refill nipple,
I would be greatly interested.
If you don't want to post the info,
could you send a PM for the parts/instructions etc.

Thank you,
Don
  • Western NV
NRA Life member

"We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker.
It is time to restore the American precept, that each individual is accountable for their actions"
Ronald Reagan

"Speeds fine, but Accuracy is final"

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 299
  • Ricky B
    • View Profile
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177

Nvreloader

  • Jr. Member
  • **
  • Posts: 60
    • View Profile
Re: 850 Hammerli
« Reply #13 on: November 11, 2017, 06:39:31 AM »
Ricky

That explains a lot,
I did not know they made fill nozzle like that.

Your right about the price, a throw a way cyl and less than $5 in parts.  ::)

Are you using the Hammerli adapter on the other end?

Thank you,
Don
  • Western NV
NRA Life member

"We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker.
It is time to restore the American precept, that each individual is accountable for their actions"
Ronald Reagan

"Speeds fine, but Accuracy is final"

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 299
  • Ricky B
    • View Profile
Re: 850 Hammerli
« Reply #14 on: November 11, 2017, 12:14:46 PM »
The rifle is designed for the 88gr cartridges No adapter needed. You are just adding the refill feature.
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177