Author Topic: Baseball caps with logo  (Read 685 times)

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1872
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Baseball caps with logo
« on: March 08, 2018, 06:54:07 AM »
If I can get enough people to commit to buying a baseball (one size fits all) cap with the Airgun Guild logo, I will place an order for them. The minimum I can order to make this happen, is 72 units. There is a charge for the logo programming, and a color must be chosen (no multiple colors). This means the actual selling price for members (including shipping to and from) would be $15.

Comments are appreciated, but keep in mind, the number interested has to get close to the 72 number before I jump in and lay out over $400 for some some bling.


  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

Christopher

  • Sr. Member
  • ****
  • Posts: 397
Re: Baseball caps with logo
« Reply #1 on: March 08, 2018, 09:35:33 AM »
Are these hats going to be open mesh or solid? I like denim myself if that's a choice and I'll take four hats if this comes to fruition.

Thanks
Chris
  • dead end road KY

CraigH

  • Newbie
  • *
  • Posts: 22
Re: Baseball caps with logo
« Reply #2 on: March 08, 2018, 01:50:20 PM »
Price of $15 is reasonable.    My preference would be solid back and light tan.
  • Lone Tree, Colorado
Craig

Beeman QB78D - Beeman P17 (2) - Beeman Chief
Benjamin Marauder Pistol
Benjamin Maximus Hunter
Benjamin Wildfire
CCS 2400KT; .22 14.6" LW barrel "Verminator"
Crosman 2240; 3 Carbines, 1 Stock Pistol
Crosman 1322C; 18" Carbine, FTP, Steel Breech
Crosman 1377; Phase 2
Crosman 1077 - Crosman 2100B
Gamo Urban
SPA PP700S-A .22
Umarex 712 - Umarex P.08

Vintage
Crosman 130 - 150 - 180 - 600 - Mark I - 38C; .22's
Hahn Super BB Repeater

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1872
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: Baseball caps with logo
« Reply #3 on: March 08, 2018, 03:11:12 PM »
I haven't investigated all of the colors, but the logo is green. So, something contrasting is required. The caps I have priced are open mesh in the rear, and one size fits all.

https://www.4imprint.com/product/8528/Wave-Cap
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

Bullfrog

  • Administrator
  • Full Member
  • *****
  • Posts: 147
Re: Baseball caps with logo
« Reply #4 on: March 11, 2018, 09:23:06 AM »
I’d do one that was camo or subdued earth colors. There is a camo option on the we site and it doesn’t seem to clash with the green.

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1995
Re: Baseball caps with logo
« Reply #5 on: March 11, 2018, 09:36:30 PM »
I'm in.  Just make sure Global Moderator is on my hat. 8)

Not
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

Alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1872
  • Set the example... Don't be one!
    • Mobile Amateur Radio
Re: Baseball caps with logo
« Reply #6 on: March 12, 2018, 03:48:41 AM »
I'm still in the think mode. Perhaps I should say money mode.

Once the give-air-away is over, I'll think about funding the hats.
  • Roswell, New Mexico
Alan

I have an Omega compressor. If you're a fellow Guild member, and you pass through Roswell, NM, I'll fill your portable tank as a courtesy.

sixshootertexan

  • Sr. Member
  • ****
  • Posts: 388
  • Ricky B
Re: Baseball caps with logo
« Reply #7 on: March 12, 2018, 07:30:30 AM »
I'm in.
CCS 2300, CCS 2400, Custom Built Regulated .25, Custom Built PRod Clone, .308 Bullet shooter, XS46U .177, Custom regulated .177, 850 Hammerli .177

mobilemail

  • Sr. Member
  • ****
  • Posts: 358
Re: Baseball caps with logo
« Reply #8 on: March 12, 2018, 03:02:03 PM »
I'm in.  Just make sure Global Moderator is on my hat. 8)

Not

aka "Da Banana Hama"
  • Carrollton IL

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1995
Re: Baseball caps with logo
« Reply #9 on: March 12, 2018, 03:05:25 PM »
I'm in.  Just make sure Global Moderator is on my hat. 8)

Not

aka "Da Banana Hama"

Really? :o
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

mobilemail

  • Sr. Member
  • ****
  • Posts: 358
Re: Baseball caps with logo
« Reply #10 on: March 12, 2018, 03:07:39 PM »
Yeah,
Banana (MonkeyDad)
Hammer (moderator with termination abilities)

but...obviously the humor didn't work so I will go back to my corner now... :P
  • Carrollton IL

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1995
Re: Baseball caps with logo
« Reply #11 on: March 12, 2018, 03:31:04 PM »
Lol!  You got issues.  Lol.  Now I will need said 🍌 🔨!

The 🐒!
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!

Steelhead

  • Full Member
  • ***
  • Posts: 198
Re: Baseball caps with logo
« Reply #12 on: March 13, 2018, 06:28:38 AM »
I'm in with a suggestion of earth tone for color.
  • Petaluma, CA
Airforce Texan .308
Benjamin Armada .25
Benjamin Prowler .177
Air Venturi compressor

Briar Patch

  • Newbie
  • *
  • Posts: 39
Re: Baseball caps with logo
« Reply #13 on: March 24, 2018, 11:31:51 AM »
It looks like this may be on the back burner for a few weeks, nevertheless - I'll certainly commit to buying one.

If I get one and like it - I would certainly buy more.  I like quality hats.
I keep 3 on my hat rack.
I've got to have one for working in the yard ~ sweat stains   
One for everyday.
One for special occasions - you know, like wearing to church, black tie events or on my wedding anniversary.   ;D 
  • Payson, UT

Monkeydad1969

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1995
Re: Baseball caps with logo
« Reply #14 on: March 25, 2018, 08:08:55 AM »
Definitely.  We all need one for special occasions.

Joe
  • Aurora, Colorado
Joe the P-Dawg Slayer!!!!!