Author Topic: Heavier pellets  (Read 563 times)

Christopher

  • Sr. Member
  • ****
  • Posts: 393
Heavier pellets
« on: December 23, 2017, 11:18:41 AM »
Just wanted to post this link http://noebulletmolds.com/smf/index.php/topic,2340.0.html for those who may be interested and not know about it. Bob Sterne has drawn up a design that is a scaled up version of a .25 JSB Heavy 34 grain to .30 cal that has an adjustable pin so the weight can be changed. Weights posted are 56, 60 and 63 grain and would be a nose pour mold. If interested, please post at the link at the NOE forum.

Bob, please let know if I have misrepresented any of the info here.

Chris


  • dead end road KY

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1478
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: Heavier pellets
« Reply #1 on: December 23, 2017, 04:54:59 PM »
I have revised the design since the .25 cal moulds, which were not that successful, most guys felt they were nose heavy.... The new design has a shorter, hemispherical nose with a Mepat (necessary for the nose pour) and a longer skirt.... It is very similar in shape to the JSB Hing Heavy .25 cal.... Here is a drawing....



Al hasn't yet given the nod to the design change, but tooling hasn't been made anyways.... This is my proposal, subject to his approval, and sufficient interest.... The pellet will fit in the modified MRod mags made by AirGunLab, and in the Flex mag.... If you would like to see moulds made, please post your interest in the thread that Chris linked above....

Bob
  • Coalmont, BC

grumpy

  • Hero Member
  • *****
  • Posts: 524
Re: Heavier pellets
« Reply #2 on: December 23, 2017, 06:29:37 PM »
That 63gr looks interesting
  • Michigan

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1478
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: Heavier pellets
« Reply #3 on: December 23, 2017, 06:40:35 PM »
I should mention that the RG-2 and RG-4 Moulds from NOE come with 3 sets of base pins, so you can do all three weights with one mould....

Bob
  • Coalmont, BC

grumpy

  • Hero Member
  • *****
  • Posts: 524
Re: Heavier pellets
« Reply #4 on: December 23, 2017, 09:04:53 PM »
I should mention that the RG-2 and RG-4 Moulds from NOE come with 3 sets of base pins, so you can do all three weights with one mould....

Bob

Very nice Bob.
  • Michigan