Author Topic: .25 cal 34-38 gr. Pellet Mould at NOE - In the Store  (Read 883 times)

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1520
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
.25 cal 34-38 gr. Pellet Mould at NOE - In the Store
« on: May 04, 2018, 10:46:43 PM »
This is a scaled down version of the .30 cal NOE Pellet.... There is a new Group Buy starting.... The RG style moulds come with multiple base pins for weights of 34, 36 and 38 gr.... 

http://noebulletmolds.com/smf/index.php/topic,2532.0.html

Bob
« Last Edit: May 23, 2018, 07:16:07 AM by rsterne »


  • Coalmont, BC

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1520
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: .25 cal 34-38 gr. Pellet Mould at NOE - Last Call
« Reply #1 on: May 13, 2018, 11:47:40 AM »
Now at Last Call if you want the discount....  http://noebulletmolds.com/smf/index.php/topic,2532.0.html

Bob
  • Coalmont, BC

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1520
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: .25 cal 34-38 gr. Pellet Mould at NOE - In the Store
« Reply #2 on: May 23, 2018, 07:17:22 AM »
These moulds are now available.... http://noebulletmolds.com/NV/index.php?cPath=374_376_483

If you participated in the Group Buy, you should get your Discount Code shortly via PM....

Bob
  • Coalmont, BC

tkerrigan

  • Full Member
  • ***
  • Posts: 101
Re: .25 cal 34-38 gr. Pellet Mould at NOE - In the Store
« Reply #3 on: May 23, 2018, 08:36:25 AM »
Just paid for mine.  Regards, Tom
  • Jefferson, OR

rsterne

  • Member 2000+fps Club
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1520
  • Mozey-On-Inn and see what Coalmont has to offer!
    • Mozey-On-Inn
Re: .25 cal 34-38 gr. Pellet Mould at NOE - In the Store
« Reply #4 on: June 28, 2018, 12:40:50 PM »
I cast up the new NOE pellets today.... The mould comes with 4 sets of RG base pins, and they produce 3 skirted pellets and one solid with a flat base.... They look like this....



The weights in 40:1 lead/tin alloy are 35.0, 37.0, 38.5 and 42.6 gr.... They all chamber perfectly in my .25 cal LW Polygonal barrel, but that is not surprising as I cut the chamber to allow for bullets as well as pellets.... I have my BRod set up with a Cothran valve and the WAR adjustable regulated tank block, set at 1900 psi.... I checked the velocity of all 5 pellets (including the JSBs) and got the following averages for one 8-shot magazine of each....

34.1 gr. JSB = 947 fps (67.9 FPE)
35.0 gr. NOE = 937 fps (68.3 FPE)
37.0 gr. NOE = 919 fps (69.4 FPE)
38.5 gr. NOE = 906 fps (70.2 FPE)
42.6 gr. NOE = 871 fps (71.8 FPE)

I was only shooting inside my shop, with the backstop 20 feet away, and all groups were one ragged hole, with no real difference between any of the pellets.... That is encouraging, because some pellets or bullets can't do that when shooting through the Chrony at that distance.... and those that do usually shoot pretty good at least out to 50 yards....

My summer is taken up with sitting at the Motel reception desk waiting for guests, and we are entering our busiest season now, so it is unlikely I will get to try these at distance any time soon.... but the velocity and energy is right where I want it for testing.... I can't wait....

Bob
  • Coalmont, BC